£43.75 inc Vat
Petzl ALVEO BEST
Only VAT Exempt if purchased by an individual for personal use.
Please do not order more than 1 at a time!
Petzl ALVEO BEST Detailed description
Description
- Petzl ALVEO BEST Optimum safety for work at peak:
– Petzl ALVEO BESTimpacts are absorbed by deformation of the expanded polystyrene liner
– its closed shell presents safety towards electrical hazards and molten metallic spray
– robust chinstrap (greater than 50 daN) limits the danger of dropping the helmet throughout a fall - Constructed for decreased weight
- Snug to put on:
– CenterFit adjustment system adjusts the scarf and retains the helmet centered on the top
– comes with two sizes of scarf foam - Many equipment can be found as a way to adapt the helmet to its use:
– PIXA or ULTRA VARIO headlamp (back and front slots)
– headlamp with elastic headband (headlamp clips)
– VIZIR, VIZIR SHADOW or VIZEN protecting defend (aspect inserts)
– listening to safety (aspect slots)
Specs
- Head circumference: 53-63 cm
- Weight: 350 g
- Materials(s): ABS, expanded polystyrene, nylon, polycarbonate, high-strength polyester, polyethylene. Accommodates Alveolen® of Sekisui Alveo AG
References
| References | A20BYA | A20BWA | A20BRA |
|---|---|---|---|
| Shade(s) | yellow | white | purple |
| Certification(s) | CE*, ANSI Z89.1-2009 sort I classe E | CE*, ANSI Z89.1-2009 sort I classe E | CE*, ANSI Z89.1-2009 sort I classe E |
| Assure | three years | three years | three years |
| Packing | 1 | 1 | 1 |
| * Meets the necessities of the EN 397 and EN 12492 requirements for influence safety. Meets the necessities of the EN 397 and EN 50365 requirements for electrical insulation. Meets the optionally available necessities of the EN 397 normal for molten metallic spray, lateral deformation and use in low temperatures. | * Meets the necessities of the EN 397 and EN 12492 requirements for influence safety. Meets the necessities of the EN 397 and EN 50365 requirements for electrical insulation. Meets the optionally available necessities of the EN 397 normal for molten metallic spray, lateral deformation and use in low temperatures. | * Meets the necessities of the EN 397 and EN 12492 requirements for influence safety. Meets the necessities of the EN 397 and EN 50365 requirements for electrical insulation. Meets the optionally available necessities of the EN 397 normal for molten metallic spray, lateral deformation and use in low temperatures. |
Only VAT Exempt if purchased by an individual for personal use.
Please do not order more than 1 at a time!
You can not zero-rate provides of protecting boots or helmets to an employer for the use by their staff. Provides from a producer to a wholesaler who in flip provides them to a retailer could be zero-rated topic to the situations set out earlier on this discover. Provides from an employer to an worker may also be zero-rated, topic to the circumstances set out earlier on this discover.
Technical info
PPE inspection process
Obtain the PDF – 2.79 MB
PPE guidelines
Obtain the PDF – zero.26 MB
Ideas for sustaining your gear
Obtain the PDF – three.10 MB
FAQ
| References | A20BYA | A20BWA | A20BRA |
|---|---|---|---|
| Colour(s) | yellow | white | purple |
| Certification(s) | CE*, ANSI Z89.1-2009 sort I classe E | CE*, ANSI Z89.1-2009 sort I classe E | CE*, ANSI Z89.1-2009 sort I classe E |
| Assure | three years | three years | three years |
| Packing | 1 | 1 | 1 |
| * Meets the necessities of the EN 397 and EN 12492 requirements for influence safety. Meets the necessities of the EN 397 and EN 50365 requirements for electrical insulation. Meets the optionally available necessities of the EN 397 normal for molten metallic spray, lateral deformation and use in low temperatures. | * Meets the necessities of the EN 397 and EN 12492 requirements for influence safety. Meets the necessities of the EN 397 and EN 50365 requirements for electrical insulation. Meets the optionally available necessities of the EN 397 normal for molten metallic spray, lateral deformation and use in low temperatures. | * Meets the necessities of the EN 397 and EN 12492 requirements for impression safety. Meets the necessities of the EN 397 and EN 50365 requirements for electrical insulation. Meets the optionally available necessities of the EN 397 commonplace for molten metallic spray, lateral deformation and use in low temperatures. |
Related products
All Carabiners
Petzl
Petzl
Petzl
Petzl
Petzl
Petzl
helmets
£65 inc Vat
Petzl
Petzl
All Helmets
Petzl