Petzl VOLT® WIND LT Detailed description
Description
- Petzl VOLT® WIND LT has put on protectors on the waistbelt and underneath the dorsal level to stop strap put on when shifting about contained in the wind turbine tower
- Speedy donning because of the EASYFIT design:
– vest ensures the harness retains its form
– FAST automated buckles on the waistbelt and leg loops permit the harness to be very simply donned, with each ft on the bottom. These buckles retain their adjustment settings between donnings. - Snug all through the work day:
– anatomical design is close-fitting, whereas giving optimum freedom of motion
– light-weight, breathable development
– extensive, semi-rigid waistbelt for wonderful help
– for vertical development with a rail or cable-based fall safety system, the LADDER CLIMB attachment level permits for ventral attachment of the fall-arrest trolley: it distributes the load on the waistbelt and thus ensures optimum consolation throughout development. In case of a fall, this attachment level routinely strikes upward to a sternal place to make sure a vertical post-fall physique place.
– leg loop foam place could be adjusted for good positioning - Straightforward to make use of:
– waistbelt and shoulder straps outfitted with self-locking DoubleBack buckles for fast and straightforward adjustment
– aspect attachment factors may be folded down to stop them snagging by accident when not in use
– stowage system for the MGO connectors on fall arrest lanyards, on every shoulder strap. In case of a fall, this technique releases the MGO connectors and permits the absorber to be deployed.
– fall indicators on the sternal and dorsal attachment factors. If a fall indicator is seen after a fall, the harness have to be retired.
– gear loops, slots for CARITOOL software holder and TOOLBAG software pouch permit straightforward group of labor instruments
Specs
- LADDER CLIMB attachment level: for attaching the trolley of a rail or cable-based fall safety system
- Aspect attachment factors: for attaching a positioning lanyard to be used in double mode
- Sternal attachment level: for attaching a fall arrest system
- Dorsal attachment level: for attaching a fall arrest system
- Rear waistbelt attachment level: for attaching a restraint lanyard
- Side attachment points: for attaching a positioning lanyard for use in double mod
- Side attachment points: for attaching a positioning lanyard for use in double mode
- Side attachment points: for attaching a positioning lanyard for use in double mode
- Side attachment points: for attaching a positioning lanyard for use in double mode
- Certification(s): ANSI Z359.11, CE EN 361, CE EN 358
- Material(s): nylon, polyester, aluminum, steel
References
References |
C72WFA 0U | C72WFA 1U | C72WFA 2U |
---|---|---|---|
Size | 0 | 1 | 2 |
Waist belt | 65-80 cm | 70-93 cm | 83-120 cm |
Leg loops | 44-59 cm | 47-62 cm | 50-65 cm |
Stature | 160-180 cm | 165-185 cm | 175-200 cm |
Weight | 1965 g | 2010 g | 2115 g |
Guarantee | 3 years | 3 years | 3 years |
Packing | 1 | 1 | 1 |
Technical info
Technical ideas
PPE inspection process
Obtain the PDF – 7.93 MB
PPE guidelines
Obtain the PDF – zero.24 MB
Ideas for sustaining your gear
Obtain the PDF – three.05 MB
References |
C72WFA 0U | C72WFA 1U | C72WFA 2U |
---|---|---|---|
Size | 0 | 1 | 2 |
Waist belt | 65-80 cm | 70-93 cm | 83-120 cm |
Leg loops | 44-59 cm | 47-62 cm | 50-65 cm |
Stature | 160-180 cm | 165-185 cm | 175-200 cm |
Weight | 1965 g | 2010 g | 2115 g |
Guarantee | 3 years | 3 years | 3 years |
Packing | 1 | 1 | 1 |