Vermeer BC190XL eight” Chipper,

Options and advantages

eight” (20 CM) X 12” (30.5 CM) INFEED OPENING-

Vast letterbox type opening permits straightforward feeding of fabric with aspect branches and drastically reduces the necessity to precut materials right down to measurement.

FOUR DOUBLE-EDGED KNIVES IN STAGGERED PATTERN-Reduces the dimensions and proportion of outsized chips and lowers course of noise over single chopping profile methods. Shallow mount angled knives don’t require adjustment of shear bar after re-sharpening or changing. Twin edges present longer operational use between re-sharpening and alternative.

34.9 kW (48.eight PS/48.1 hp) Four CYL WATER-COOLED KUBOTA DIESEL ENGINE-

Quiet and fuel-efficient engine offering excessive chopping efficiency with confirmed market-leading reliability and help. Oversize cooling system offers excessive capability even when subjected to excessive mud and airborne particles.

AUTOMATIC DRIVE BELT TENSIONER-

Fixed drive belt pressure is maintained by means of a easy mechanical system even when underneath cyclic load, for the complete service lifetime of the belt. No adjustment needed when altering belts. Belts could be modified in minutes with out requiring instruments to assist reduce upkeep time.

CENTRIFIGAL CLUTCH-

Permits engine begin with out having to show chopping disc. Reduces stress on engine and driveline, particularly in chilly climate and if materials continues to be within the cutter system when beginning.

OFFSET OVERSIZED HORIZONTAL FEED ROLLERS-

Giant-diameter feed rollers mixed with 390 kg of clamping pressure guarantee even probably the most densely branched materials is pulled in at once. The offset decrease curler tremendously enhances the feeding of very brief items and supplies superior grip on awkward formed materials.

SMARTFEED WITH INFEED AUTO REVERSE-

Productiveness is enhanced by offering engine load administration to make sure applicable energy for processing of the fabric and enabling lowered gasoline consumption when not wanted. Infeed auto reverse and re-feed of inauspicious materials helps scale back operator effort or re-sawing of fabric.

LOCALISED SERVICE POINTS-

All filters and engine service factors are shortly accessible by means of proper engine door to assist reduce upkeep time and for comfort. Cutter bearing grease factors are situated on the surface, reverse the disc for fast and direct entry.

OVERSIZED BEARINGS-

Drive shaft, belt tensioner, feed curler and cutter disc bearings are all outsized and are taken from our bigger chippers. Confirmed reliability can contribute towards decreased upkeep and repair prices.

PUSH-BUTTON THROTTLE CONTROL-

Consumer-friendly throttle up/down of engine for dependable operation and ease. The mixture of the centrifugal clutch and belt tensioner permits the chipper to be shortly and effectively introduced into operation with extraordinarily low vibration, contributing to longer service life and decreased upkeep time.

FEED TABLE ABOVE 600 MM FROM GROUND-

Infeed desk is situated at a peak making certain good feeding place and enhanced consolation for the operator. Absolutely floating decrease and aspect feed cease bars meet probably the most stringent EC necessities, enabling enhanced operator management of chipping operations.

FULLY ENCLOSED BODY-

Chipping mechanism is enclosed inside a compact cowl that produces decreased noise emissions and retains system away from particles. Fast and quick access to key service factors, fluid tanks and chipping mechanism is achieved by way of entry doorways, permitting loads of room to work for lowered operator effort and fatigue throughout service operations.

Vermeer BC190XL eight” Chipper

Dimensions and Weight;
Size – Feed Desk Up, Tongue In
137.eight”
350 cm
Width
61″
154.9 cm
Peak
94.5″
240 cm
Weight – Engine Choice One
3190 lbs
1447 kg
Tongue Weight – Engine Choice One
165 lbs
74.eight kg

ENGINE
Make and Mannequin
Kubota V2203-M-E3B
Variety of Cylinders
Gross Horsepower (Most)
48.1 hp
35.9 kw
Torque (Max)
106 ft-lb
143.7 Nm
Gasoline Tank Capability
15 gal
56.eight L
Gasoline Sort
Diesel
Air Cleaner
Donaldson 2 Stage Dry
Oil Filter
Spin On
Beneficial Oil
API CH-Four/SJ
Cooling Medium
Liquid
Alternator
Kubota-40 Amps
Fan
15″ Suction
Clutch Sort
Group 24 – 660 CCA
DRUM/DISC CUTTING SYSTEM
Materials Capability
eight”
20.three cm
Width
43.three”
110 cm
Variety of Knives
Four
Materials
A8 Chipper
Useable Edges
2
Variety of Bolts/Knife
2
CUTTER DRIVE COMPONENTS – ENGINE OPTION ONE
Variety of Bearings
Sort
Twin Spherical Curler
Producer
Linkbelt
Belt Loafer/Tensioner
Automated, damped pressure
Belt Sort
three Rib Basic B,Banded Aramid With Clutching Cowl
DISCHARGE SYSTEM
Backside Thickness
11″
27.9 cm
Prime Thickness
11″
27.9 cm
Aspect Wall Thickness
11″
27.9 cm
Deflector Thickness
14″
35.6 cm
Chute Rotation Angle
270 deg
Rotation Sort
Pin
Rotational Lock
Clamp
HYDRAULIC SYSTEM
Tank capability
6 gal
22.7 L
Really helpful Oil Sort
VMF
System aid strain
2500 psi
172.Four bar
ELECTRICAL SYSTEM
System Voltage
12
Controller
CB02
Show
LED
CHASSIS
Hitch Sort
Alko 161S 50 mm ball
Fender Description
Bolt on-steel
Axle/Suspension
Alko Plus 1500 kg
Tires – Choice One
175R13C8PR
Wheels – Choice One
550 lb Jockey Wheel
Brake Sort
Mechanical surge